Optimo 454

Precision dexterity in mildly aggressive environments, for those sensitive to natural latex

  • Outstanding precision dexterity, due to the qualities of MAPA’s unique synthetic material
  • Good handling of slippery objects, due to the embossed texture
  • Optimal comfort: anatomical shape, new flocking quality

Applications

  • Health
    • Common Tasks in hospitals and clinics
  • Local Authorities (Cleaning)
    • Handling household detergents

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    3000
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material Synthetic elastomer
Colour Turquoise
Interior Finish Flocked
Exterior Finish Embossed texture
Length (cm) 31
Thickness (mm) 0.35
Size 6 7 8 9 10
Packaging 1 pair/bag
50 pairs/carton
Liquidproof Protection - Optimo 454 - situation
Liquidproof Protection - Optimo 454 - situation
Liquidproof Protection - Optimo 454 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight and heat sources.

Laundering conditions

Before taking of the gloves, clean them as appropriate :

  • in use with a solvent (Naphta, etc...) : rub over with a dry cloth
  • in use with acids or alkalines : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 43 2 EN 374-3:2003 4
+
Acetic acid 80% 64-19-7 43 2 EN 374-3:2003 1
-
Acetone 99% 67-64-1 1 0 EN 374-3:2003 1
-
Bleach 12° 7681-52-9 NT NT 4
NA
Cyclohexane 99% 110-82-7 NT NT 1
NA
Fuel oils mixture 68476-34-6 155 4 EN 374-3:2003 4
++
Hydrochloric acid 10% 7647-01-0 NT NT 4
NA
Hydrochloric acid 35% 7647-01-0 450 5 EN 374-3:2003 4
++
Methanol 99% 67-56-1 9 0 EN 374-3:2003 2
-
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 NT NT 1
NA
Naphtha, Hydrodesulphurized Heavy mixture 64742-82-1 NT NT 2
NA
Naphtha, Hydrotreated Heavy mixture 64742-48-9 86 3 EN 374-3:2003 NT
NA
Nitric acid 10% 7697-37-2 480 6 EN 374-3:2003 NT
NA
Nitric acid 20% 7697-37-2 480 6 EN 374-3:2003 3
++
Phosphoric acid 75% 7664-38-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium Metabisulfite 20% 7681-57-4 480 6 EN 374-3:2003 2
+
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 50% 7664-93-9 480 6 EN 374-3:2003 4
++
Toluene 99% 108-88-3 1 0 EN 374-3:2003 1
-
Unleaded gasoline mixture 8006-61-9 3 0 EN 374-3:2003 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.