Alto 258

Strong protection against aggressive concentrated detergents

  • Added comfort and absorption of prespiration, due to the cotton flock-lining
  • Good handling of slippery objects, due to the embossed texture
  • Good resistance to many diluted acids

Applications

  • Mechanical industry
    • Minor maintenance Tasks
    • Assembly of small, oil and grease free parts
  • Aeronautics industry
    • Work with composite materials (resins)
  • Chemical industry
    • Common handling Tasks

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    1110X
  • Specific Chemical Protection EN 374
    KPS
  • Micro-organisms EN 374
Material Natural latex
Colour Yellow
Interior Finish Flocked
Exterior Finish Embossed texture
Length (cm) 32
Thickness (mm) 0.60
Size 6 7 8 9 10
Packaging 1 pair/bag
10 pairs/box
100 pairs/carton
Liquidproof Protection - Alto 258 - situation

Operating instructions

Instructions for use

  • For enhanced safety and service life of the gloves :
  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitised to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with a solvent (alcohol, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
    Caution : inappropriate usage of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended, can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 10 0 EN 374-3:2003 1
-
2-Nitropropane 99% 79-46-9 18 1 EN 374-3:2003 3
=
2-Propanol (Isopropanol) 99% 67-63-0 40 2 EN 374-3:2003 4
+
Acetic acid 99% 64-19-7 21 1 EN 374-3:2003 3
=
Acetone 99% 67-64-1 5 0 EN 374-3:2003 3
=
Butyl Acetate 99% 123-86-4 10 0 EN 374-3:2003 2
-
Cyclohexane 99% 110-82-7 7 0 EN 374-3:2003 1
-
Dimethylformamide 99% 68-12-2 30 1 EN 374-3:2003 4
+
Dimethylsulfoxide 99% 67-68-5 190 4 EN 374-3:2003 4
++
Ethanol 95% 64-17-5 17 1 EN 374-3:2003 3
=
Ethyl acetate 99% 141-78-6 3 0 EN 374-3:2003 2
-
Ethylene glycol 99% 107-21-1 NT NT 4
NA
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Hydrochloric acid 35% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 26 1 EN 374-3:2003 3
=
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 6 0 EN 374-3:2003 3
=
Methyl methacrylate 95% 80-62-6 5 0 EN 374-3:2003 3
=
Methylisobutylketone 99% 108-10-1 6 0 EN 374-3:2003 3
=
N-methyl-2-Pyrrolidone 99% 872-50-4 60 2 EN 374-3:2003 4
+
Naphtha, Hydrotreated Heavy mixture 64742-48-9 7 0 EN 374-3:2003 1
-
Phosphoric acid 75% 7664-38-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Styrene 99% 100-42-5 2 0 EN 374-3:2003 1
-
Sulfuric acid 96% 7664-93-9 83 3 EN 374-3:2003 NT
NA
t-Butyl Methyl Ether 98% 1634-04-4 8 0 EN 374-3:2003 2
-
Tetrahydrofurane 99% 109-99-9 2 0 EN 374-3:2003 1
-
Toluene 99% 108-88-3 6 0 EN 374-3:2003 1
-
Trichloroethylene 99% 79-01-6 1 0 EN 374-3:2003 1
-
Vinyl acetate 99% 108-05-4 3 0 EN 374-3:2003 3
=
Xylene 99% 1330-20-7 4 0 EN 374-3:2003 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.