Solo Ultra 996

Excellent mechanical resistance, ideal in oily environments

  • Excellent dexterity thanks to reduced material thickness.
  • Easy to put on and to take off.
  • Recommended for persons sensitized to natural rubber proteins.

Applications

  • Automotive/mechanical industry
    • Assembly of small oily parts
  • Aeronautics industry
    • Work with composite materials (resins)
  • Laboratory
    • Manufacturing of medicines
    • Pharmaceutical preparation
    • Research, analysis, handling of precision parts

Product details

  • Cat. 3
  • Specific Chemical Protection EN 374
    KPT
  • Micro-organisms EN 374
Material Nitrile
Colour White
Interior Finish Powdered
Exterior Finish Smooth with pebbled fingertips
Length (cm) 24.5
Thickness (mm) 0.10
Size 6 7 8 9
Packaging 100 gloves/box
1000 gloves/carton
Disposable - Solo Ultra 996 - situation

Operating instructions

Instructions for use

  • It is not recommended to persons sensitized to dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • Position the cuff over the garment to prevent penetration of a liquid.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
Hydrochloric acid 35% 7647-01-0 79 3 EN 374-3:2003 NT
NA
n-Butanol 99% 71-36-3 6 0 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.