Solo 990

The best value for precise movements

  • Precision dexterity: reduced glove thickness
  • Easy to put on and take off
  • Protection adapted to short duration usage

Applications

  • Automotive/mechanical industry
    • Assembly of small parts

Product details

  • Cat. 3
  • Micro-organisms EN 374
Material PVC
Colour Translucent
Interior Finish Powdered
Exterior Finish Smooth
Length (cm) 24
Thickness (mm) 0.10
Size 6 7 8 9
Packaging 100 gloves/box
1000 gloves/carton
Disposable - Solo 990 - situation
Disposable - Solo 990 - situation

Operating instructions

Instructions for use

  • Put the gloves on dry, clean hands.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

  • Store the gloves in their original packaging protected from light and humidity, far from heat sources.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC).
This product contains more than 0.1 % of di-isononyl phthalate (CAS = 28553-12-0) listed in the annexe XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH). These substances shall not be used, at concentrations higher than 0.1 % by mass of the plasticised material, in toys and childcare articles which can be placed in the mouth by children.

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
n-Butanol 99% 71-36-3 1 0 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 22 1 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.