AdvanTech 570

The most comprehensive solution: resistance to alpha rays, mechanical and chemical protection

  • 100% PU formula, to ensure resistance to alpha rays without deterioration
  • A very high level of mechanical protection
  • A reinforced version, with high-density fibres to increase protection
  • A wide range of chemical protection

Specific features

The patented structure of the reinforced version, with high-density fibres to increase protection. The three available diameters enable adaptation to all glove boxes.

Applications

  • --Single tasks--
    • Handling in glove boxes
    • Handling of aggressive parts
    • Laboratories
    • Nuclear fuel manufacturing
    • Operations in isolators, in the pharmaceutical industry
    • Stripping of parts in confined settings

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    4344
  • Specific Chemical Protection EN 374
    AFGJKL
  • Micro-organisms EN 374
  • Radio-active contamination EN 421
Material Polyurethane
Colour Green
Interior Finish
Exterior Finish Smooth
Length (cm) 80
Thickness (mm) 1.50
Size 10
Packaging 10 gloves/carton

Operating instructions

Instructions for use

  • Fit the glove according to drybox manufacturer recommendation and check enclosure is in accordance with your needs .
  • It is not recommended for persons sensitized to isocyanates.
  • Avoid contact with amides, concentred acids, oxydant acids, ketones, chlorinated solvents. For more information on glove usage, performances and chemical resistance, contact your distributor or MAPA PROFESSIONNEL technical customer service.
  • put the glove on dry, clean hands.
  • Check glove integrity before use.

Storage conditions

  • Store the glove in their original packaging protected from light, heat and humidity

Laundering conditions

  • Insure the inside of the glove is dry before reusing them.Discard the glove if damaged

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product contains more than 0.1 % of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated according to the regulation n° 1907/2006 of the European parliament and of the Council concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
Hydrochloric acid 35% 7647-01-0 113 3 EN 374-3:2003 NT
NA
Xylene 99% 1330-20-7 84 3 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.