AdvanTech 513

Unique blend of three polymers for enhanced comfort and durability

  • Protection against chemical splash
  • Slip relief providing a secure grip when handling wet or dry objects
  • Previous name: ROLLPRUF 513


  • --Single tasks--
    • Biotechnology
    • Laboratories
    • Pharmaceutical industry
  • Electronics
    • Photomask assembly, integrated circuit assembly, CD production, placement of thin layers

Product details

  • Cat. 3
  • Type B
    Specific Chemical Protection EN 374
  • Micro-organisms EN 374
  • Radio-active contamination EN 421
Material Natural latex, neoprene and nitrile
Interior Finish Chlorinated
Exterior Finish Smooth with pebbled fingertips
Length (cm) 30,5
Thickness (mm) 0,20
Size 9
Packaging 50 (right hands or left hands) gloves/bag
50 pairs/bag
200 pairs/carton

Operating instructions

Instructions for use

  • It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • The gloves do not protect from ionizing radiations and did not undergo the resistance test to cracking unde the action of ozone.
  • In case of chemical contact, immediately remove the gloves without touching the outside and dispose of appropriately.
  • Position the cuff over the garment to prevent penetration of a liquid.
  • These gloves are designed for single use only.

Storage conditions

  • Store the gloves in their sealed packaging protected from light, humidity and away from heat sources and electrical installations.
  • Maximum recommended storage: 1 year.


This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substanceincluded in the annex XVII of the regulation n° 1907/2006 of the EuropeanParliament and of the Council (REACH)


Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
Standard Degradation
1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% 76-13-1 3 0 ASTM F739 NT
2-Propanol (Isopropanol) 99% 67-63-0 5 0 ASTM F739 NT
4,4'-Methylenedianiline (MDA) 15% and 15% Methanol mixture 101-77-9 2 0 ASTM F739 NT
Acetone 99% 67-64-1 2 0 ASTM F739 NT
Ammonium hydroxide solution 29% 1336-21-6 19 1 ASTM F1383 NT
Hydrochloric acid 37% 7647-01-0 110 3 ASTM F1383 NT
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 NT NT 4
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
Sulfuric acid 96% 7664-93-9 21 1 EN 374-3:2003 NT
t-Butanol 99% 75-65-0 10 1 EN 374-3:2003 NT

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.