Stansolv AK-22 381

Maximum comfort and chemical protection

  • Extremely supple, due to the unique Mapa multi-layer process
  • Embossed texture for better grip of wet objects
  • Added comfort and thermal insulation, due to the cotton-knit lining

Specific features

Unique separate liner and shell construction provides liquidproof protection

Applications

  • Automotive/mechanical industry
    • Surface treatment
    • Part degreasing
    • Automotive assembly
  • Other industries
    • Machine maintenance
    • Laboratory tests
  • Chemical industry
    • Handling drums of chemical products
    • Chemical product blending
    • Manipulating valves

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    3121
  • Specific Chemical Protection EN 374
    AJKL
  • Micro-organisms EN 374
  • Heat and fire EN 407
    X1XXXX
Material Nitrile
Colour Green
Interior Finish Textile support Mapa Technology
Exterior Finish Embossed texture
Length (cm) 35.5
Thickness (mm) 0.85
Size 7 8 9 10 11
Packaging 12 pairs/bag
72 pairs/carton
Chemical Protection - Stansolv AK-22 381 - situation
Chemical Protection - Stansolv AK-22 381 - situation
Chemical Protection - Stansolv AK-22 381 - situation
Chemical Protection - Stansolv AK-22 381 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their packaging protected from light and humidity.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc…): rub over with a dry cloth
  • in use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 21 1 EN 374-3:2003 1
-
1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% 76-13-1 480 6 ASTM F739 4
++
1,2 - dichloroethane 99% 107-06-2 3 0 ASTM F739 NT
NA
2-Butoxyethanol (Butyl Cellusolve) 99% 111-76-2 372 5 ASTM F739 4
++
2-Ethoxyethyl acetate (Cellosolve Acetate) 99% 111-15-9 67 3 ASTM F739 2
+
2-Propanol (Isopropanol) 99% 67-63-0 480 6 ASTM F739 4
++
Acetaldehyde 99% 75-07-0 3 0 ASTM F739 NT
NA
Acetic acid 99% 64-19-7 91 3 ASTM F739 2
+
Acetone 99% 67-64-1 3 0 ASTM F739 NT
NA
Acetonitrile 99% 75-05-8 10 0 EN 374-3:2003 NT
NA
Acetyl Chloride 98% 75-36-5 1 0 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 435 5 ASTM F739 4
++
Aniline 99% 62-53-3 89 3 ASTM F739 1
-
Benzene 99% 71-43-2 6 0 ASTM F739 2
-
Bromobenzene 99% 108-86-1 11 1 EN 374-3:2003 NT
NA
Butyl Acetate 99% 123-86-4 20 1 EN 374-3:2003 2
=
Carbon disulfide 99% 75-15-0 4 0 ASTM F739 NT
NA
Carbon Tetrachloride 99% 56-23-5 114 3 ASTM F739 4
++
Chromic Acid 50% 7738-94-5 250 5 ASTM F739 4
++
Cumene 98% 98-82-8 166 4 ASTM F739 3
++
Cyclohexane 99% 110-82-7 480 6 EN 374-3:2003 4
++
Dichloromethane (Methylene Chloride) 99% 75-09-2 1 0 ASTM F739 NT
NA
Diethanolamine 97% 111-42-2 480 6 ASTM F739 4
++
Dimethylformamide 99% 68-12-2 6 0 EN 374-3:2003 1
-
Dimethylsulfoxide 99% 67-68-5 157 4 ASTM F739 3
++
Ethanol 95% 64-17-5 288 5 ASTM F739 4
++
Ether (Diethyl Ether) 99% 60-29-7 41 2 ASTM F739 4
+
Ethyl acetate 99% 141-78-6 7 0 EN 374-3:2003 NT
NA
Ethyl benzene 99% 100-41-4 28 1 ASTM F739 2
=
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Formaldehyde 37% 50-00-0 480 6 ASTM F739 4
++
Fuel oils mixture 68476-34-6 480 6 EN 374-3:2003 3
++
Furfural 99% 98-01-1 34 2 ASTM F739 1
-
Hexamethylene Diisocyanate (1,6 - Diisocyanatohexane) 98% 822-06-0 2 0 ASTM F739 NT
NA
Hydrazine 35% 302-01-2 480 6 ASTM F739 4
++
Hydrazine 70% 302-01-2 480 6 ASTM F739 4
++
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 4
++
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 480 6 ASTM F739 4
++
Isobutyl alcohol 99% 78-83-1 480 6 ASTM F739 4
++
Kerosene mixture 8008-20-6 480 6 ASTM F739 4
++
m-Cresol 97% 108-39-4 309 5 ASTM F739 1
-
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 52 2 EN 374-3:2003 4
+
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 3 0 ASTM F739 NT
NA
Methylisobutylketone 99% 108-10-1 25 1 ASTM F739 2
=
n-Heptane 99% 142-82-5 480 6 EN 374-3:2003 4
++
n-hexane 95% 110-54-3 480 6 ASTM F739 4
++
N-N dimethyl acetamide 99% 127-19-5 15 1 ASTM F739 2
=
Naphtha mixture 8030-30-6 480 6 ASTM F739 4
++
Naphtha VM&P mixture 8032-32-4 480 6 ASTM F739 4
++
Naphtha, Hydrotreated Heavy mixture 64742-48-9 480 6 EN 374-3:2003 4
++
Nitric acid 10% 7697-37-2 NT NT 4
NA
Nitric acid 20% 7697-37-2 NT NT 4
NA
Nitric acid 40% 7697-37-2 NT NT 4
NA
Nitric acid 50% 7697-37-2 344 5 ASTM F739 4
++
Nitrobenzene 99% 98-95-3 42 2 ASTM F739 1
-
Phenol 85% 108-95-2 191 4 ASTM F739 3
++
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Phosphorous Trichloride 98% 7719-12-2 16 1 ASTM F739 1
-
Potassium Fluoride 40% 7789-23-3 480 6 ASTM F739 4
++
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Propylene Oxide 99% 75-56-9 2 0 ASTM F739 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 4
++
Spent Acid mixture NA 480 6 ASTM F739 NT
NA
Styrene 99% 100-42-5 7 0 ASTM F739 1
-
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 3
++
Sulfuric acid 50% 7664-93-9 480 6 ASTM F739 NT
NA
Sulfuric acid 96% 7664-93-9 97 3 EN 374-3:2003 NT
NA
t-Butyl Methyl Ether 98% 1634-04-4 452 5 ASTM F739 4
++
tert-Butyl Hydroperoxide 70% 75-91-2 208 4 ASTM F739 4
++
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 183 4 ASTM F739 3
++
Toluene 99% 108-88-3 8 0 EN 374-3:2003 2
-
Trichloroethylene 99% 79-01-6 4 0 EN 374-3:2003 1
-
Triethanolamine 98% 102-71-6 480 6 ASTM F739 4
++
Turpentine mixture 8006-64-2 480 6 ASTM F739 4
++
Unleaded gasoline mixture 8006-61-9 52 2 EN 374-3:2003 4
+
Xylene 99% 1330-20-7 22 1 EN 374-3:2003 2
=

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.