Alto Plus 260

A good choice when dexterity and chemical protection is needed for extended wear

  • Good protection against chemical products
  • Flock-lining adds comfort and perspiration absorption
  • Embossed textured grip ensures good handling of slippery objects

Applications

  • Other industries
    • Maintenance in wet environments
  • Aeronautics industry
    • Work with composite materials (resins)
  • Chemical industry
    • Resin-working
    • Resin and adhesive manufacturing
    • Common handling Tasks

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    2120X
  • Specific Chemical Protection EN 374
    AKLMPT
  • Micro-organisms EN 374
Material Natural latex
Colour Black
Interior Finish Flocked
Exterior Finish Embossed texture, chlorinated
Length (cm) 32
Thickness (mm) 0.8
Size 7 8 9 10 11
Packaging 1 pair/bag
10 pairs/bag
50 pairs/carton

Operating instructions

Instructions for use

It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace
may differ from the “CE”-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the
website www.mapa-pro.com or contact the MAPA Technical Customer Service to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate
• in use with a solvent : rub over with a dry cloth
• in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
• Caution : using the gloves or submitting them to another cleaning or laundering process can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the
    Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the
    European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
Acetone 99% 67-64-1 18 1 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 108 3 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Styrene 99% 100-42-5 13 1 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 93 3 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.